Draw your retaining wall, get the steel takeoff.
Trace the wall run on the grid the way you'd sketch it on site, type the finished height of each section, and this works out the posts, lengths, sleeper courses, footing concrete and drainage — priced against the Metarom stock range. Send the result straight through as a stock request.
01Trace the runClick corner to corner. Angles snap to 15°, lengths to 100 mm.
02Set the heightsPer section, in millimetres. Type exact lengths to correct the sketch.
03Take the numbersPost schedule with prices, plus quantities for everything else.
Click to drop each corner · double-click or Enter to finish the run
H / joiner
End
Corner
Materials takeoff
What you need to order
Steel priced from the current Metarom indicative list, ex GST. Sleepers, concrete and drainage are quantified here for your own supply.
| Item | Length | Qty | Each | Line |
|---|
| Item | Detail | Qty |
|---|
Steel subtotal$0.00
First-order discount 15%−$0.00
GST 10%$0.00
Total inc GST$0.00
* required so we can send the takeoff and get back to you.
Before you order
- This is a quantity takeoff, not a structural design. Post size, embedment, footing diameter and reinforcement are the engineer's or specifier's call — walls over about 1 m usually need engineering and council approval.
- Prices are the published indicative rates in AUD, ex GST, and stay subject to confirmation. The 15% first-order discount applies to your first order with us.
- Post lengths round up to the next stocked length. Where a required length runs past the stocked range the line is marked call us — we can quote a cut length.
- Sleeper counts assume full-height infill with no stepping down within a section. Split a sloping run into several sections to follow the fall.
- Send your drawings or a lintel schedule with the request and we'll quote against them.